F065
Menovitý priemer vonkajšieho potrubia:
- Odporúčané podnikovou normou HL Cryogenic Equipment. Môže byť tiež vyrobené podľa požiadaviek zákazníka.
- Návrhový tlak:
- Odporúčané ≤ 16 barov. Alebo zvolí typ zváraného pripojenia (≤ 40 barov).
- Materiál vonkajšej rúry
Bez špeciálnych požiadaviek sa materiál vnútorného a vonkajšieho potrubia zvolí rovnaký.
3.1.3 Typ zváraného spoja
odel
Pripojenie
Typ
Menovitý priemer vnútorného potrubia
Návrhový tlak
Materiál
vnútorného potrubia
Štandard
Poznámka
W010
00X
Typ zváraného pripojenia pre statickú vákuovo izolovanú flexibilnú hadicu
DN10, 3/8"
8~40 barov
Nerezová oceľ série 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Menovitý priemer vonkajšieho potrubia: | |
| Návrhový tlak | Materiál vnútorného potrubia. | A je 304, | DN40, 1-1/2" | C je 316, |
| D je 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Návrhový tlak |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Odporúčané ≤ DN25 alebo 1". Alebo zvoľte typ vákuového bajonetového pripojenia s prírubami a skrutkami (od DN10, 3/8" do DN80, 3"), typ zváraného pripojenia (od DN10, 3/8" do DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Štandard | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Menovitý priemer vonkajšieho potrubia: |
| Odporúčané podnikovou normou HL Cryogenic Equipment. Môže byť tiež vyrobené podľa požiadaviek zákazníka. | Materiál vonkajšej rúry | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Typ | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Štandard | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Návrhový tlak. | / | DN25, 1" | DN25, 1" | / | |
| Materiál vnútorného potrubia. | / | DN25, 1" | DN25, 1" | / | |
| C je 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Menovitý priemer vnútorného potrubia:
| Odporúčané ≤ DN25 alebo 1". Alebo zvoľte typ vákuového bajonetového pripojenia s prírubami a skrutkami (od DN10, 3/8" do DN80, 3"), typ zváraného pripojenia (od DN10, 3/8" do DN150, 6") | Menovitý priemer vonkajšieho potrubia: |
| Odporúčané podnikovou normou HL Cryogenic Equipment. Môže byť tiež vyrobené podľa požiadaviek zákazníka. | Návrhový tlak: |
| Odporúčané ≤ 16 barov. Alebo zvolí typ zváraného pripojenia (≤40 barov) | Materiál vonkajšej rúryBez špeciálnych požiadaviek sa materiál vnútorného a vonkajšieho potrubia zvolí rovnaký.3.2 Dynamický vákuovo izolovaný potrubný systém3/S |
| 3.2.1 Typ vákuového bajonetového pripojenia so svorkami | odel |
| Pripojenie | Typ |
| Menovitý priemer vnútorného potrubia | Návrhový tlak |
| Materiál | vnútorného potrubia |
| Štandard | Poznámka |
HDB01008
Typ bajonetového pripojenia s vákuovou svorkou pre dynamickú vákuovo izolovanú flexibilnú hadicu
lDN10, 3/8"
l8 barov
| Nerezová oceľ série 300 C je 316, | Materiál vnútorného potrubia. | |
| A je 304, | B je 304L,C je 316,D je 316L, | |
| E je iné. | HLH | DB01508 |
| DN15, 1/2" | Návrhový tlak: | Návrhový tlak: |
| DN20, 3/4" | Návrhový tlak: | Návrhový tlak: |
| DN25, 1" | Návrhový tlak: | Návrhový tlak: |
| Menovitý priemer vonkajšieho potrubia: | Návrhový tlak: | Návrhový tlak: |
Odporúčané ≤ 8 barov. Alebo zvoľte typ vákuového bajonetového pripojenia s prírubami a skrutkami (≤16 barov), typ zváraného pripojenia (≤40 barov)Materiál vonkajšej rúryBez špeciálnych požiadaviek sa materiál vnútorného a vonkajšieho potrubia zvolí rovnaký.
Stav napájania:
HL-HX-X-Miesto musí zabezpečiť dodávku energie do vákuových čerpadiel a informovať spoločnosť HL Cryogenic Equipment o miestnych informáciách o elektrickej energii (napätie a frekvencia).-00-X
3.2.2 Typ vákuového bajonetového pripojenia s prírubami a skrutkami
odel
Pripojenie
Typ
Menovitý priemer vnútorného potrubia
Návrhový tlak
Materiál
vnútorného potrubia
Štandard
Poznámka
Nominal Diameter of Inner Pipe
00X
8~16 barov
DN10, 3/8"
8~16 barov
Nerezová oceľ série 300
Design Pressure
Návrhový tlak.
08 je 8 barov,
16 je 16 barov.
Materiál vnútorného potrubia.
A je 304,
B je 304L,
C je 316,
D je 316L,
E je iné.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Séria vákuovo izolovaných fázových separátorov | DN10, 3/8" | Arménčina
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrancúzštinaMenovitý priemer vonkajšieho potrubia:X | DN15, 1/2" | |||||
| FrancúzštinaOdporúčané ≤ 16 barov. Alebo zvolí typ zváraného pripojenia (≤ 40 barov).X | DN20, 3/4" | |||||
| FrancúzštinaStav napájania:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandčina
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Francúzština08 je 8 barov,00X | a 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrancúzštinaSamojčina00X | DN15, 1/2" | |||||
| FrancúzštinaSindhčina00X | DN20, 3/4" | |||||
| FrancúzštinaTadžický00X | DN25, 1" | |||||
| FrancúzštinaThajčina00X | DN32, 1-1/4" | |||||
| FrancúzštinaUzbečtina00X | DN40, 1-1/2" | |||||
| FrancúzštinaXhoština00X | DN50, 2" | |||||
| FrancúzštinaZulu00X | DN65, 2-1/2" | |||||
| FrancúzštinaOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Stav napájania:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Nerezová oceľ série 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrancúzštinaDN15, 1/2"00X | DN15, 1/2" | |||||
| FrancúzštinaDN20, 3/4"00X | DN20, 3/4" | |||||
| FrancúzštinaDN25, 1"00X | DN25, 1" | |||||
| FrancúzštinaW03200X | DN32, 1-1/4" | |||||
| FrancúzštinaW04000X | DN40, 1-1/2" | |||||
| FrancúzštinaW05000X | DN50, 2" | |||||
| FrancúzštinaW06500X | DN65, 2-1/2" | |||||
| FrancúzštinaW08000X | DN80, 3" | |||||
| HVákuová plášťová hadica00X | DN100, 4" | |||||
| HRegulačný ventil prietoku kvapalného kyslíka v Číne00X | DN125, 5" | |||||
| HVeľkoobchodná cena Čína Čína ISO štandardná nádrž 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSDynamický systém vákuového čerpadla00X | Séria vákuovo izolovaných fázových separátorov | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrancúzštinaWhatsApp00X | DN15, 1/2" | |||||
| FrancúzštinaWeChat00X | DN20, 3/4" | |||||
| FrancúzštinaNemčina00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: gréčtina
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Dánčina
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoskýX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Arménčina
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstónčinaX | DN15, 1/2" | |||||
| HLHFrízčinaX | DN20, 3/4" | |||||
| HLHGudžarátčinaX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandčina
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalajálamčina00X | Maorčina | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamojčina00X | DN15, 1/2" | |||||
| HLHDSindhčina00X | DN20, 3/4" | |||||
| HLHDTadžický00X | DN25, 1" | |||||
| HLHDThajčina00X | DN32, 1-1/4" | |||||
| HLHDUzbečtina00X | DN40, 1-1/2" | |||||
| HLHDXhoština00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
